• 36 hole
  • Available in 14mm or 3/8” axle bolts
  • 9t,10t, and 11t,12t,13t,16t by special request.
  • RHD or LHD

Use the Spoke Length Chart to decide which spokes are needed for what rim.


Black, Blue, Red, Gold, or Raw



  • 7075 T6 aluminum shell
  • 17mm 4140 Heat Treated steel center axle
  • Specifically for use w/ Tree Twigs n’ Berries straight pull spokes
  • Driver uses a ceramic plain bearing instead of ball bearings
  • 5 cross lace pattern
  • Low friction bearing design
  • Comes with a 7075 T6 aluminum Tree Hub Guard



14mm – 14oz/392g w/ hubguard

3/8” – 13.3oz/372g w/ hubguard


I was tired of hubs that did not spin freely and slow you down. So I set out to create a hub that had no bearing resistance. I wanted to fix the problem of breaking spokes.



The hub has special bearing system that allows the hub to roll as freely as possible without resistance so it’s the best spinning hub out there.

Straight pull spokes are stronger than J bend spokes because they work purely on the tensile strength of the spoke. Tensile strength is the resistance to the spoke being pulled at both ends. By using a straight pull spokes design we creating one of the strongest and stiffest wheels in BMX. It’s really easy to lace the wheel, just push the spoke into the hub and the spoke goes right to the corresponding hole in the rim. Built up the spokes create a noticeably stiffer wheel.

The spokes are laced 5 cross. I chose 5 cross because it made it possible to assemble the wheel where there was room to feed the spokes into the hub. The spokes lace perpendicular to the center of the hub which is the strongest lacing pattern for wheels.

Hub comes with a replaceable 7075 T6 aluminum Tree Hub Guard that protects the spokes from damage during grinding.

The driver uses a 3 pawl system that engages 3 pawls simultaneously. And it uses a ceramic plain bearing instead of little cartridge bearings that can tend to break.

The axle has a unique thread design that prevents cross threading.

The 14mm heat-treated hollow chromoly axle bolts are made to be used directly with the ratchet or extension. So there are fewer tools to keep in your bag


-Sam Schulte Designer/Owner